Introduction
Cone Rubber Fender is the latest generation of 'cell' fenders, with optimal performance and efficiency. The conical body shape makes the cone fender very stable even at large compression angles, and provides excellent shear strength. With overload stops the Cone Rubber Fender is even more resistant to over-compression.
Advantages
This Cone Rubber Fender has various advantages as following:
1. Its structure is more reasonable, deflection can reach 70% the equal specification fender energy absorb raise one more times,long life using. It can reduce the cost of the dock project.
2.While vessel angular berthing, its performance basically unchanged.
3.Front panel set in the margin of fender,it can lower the surface pressure of the vessel side board,the surface pressure can be controlled at below 200KN/m². It can be applied for large vessel berthing.
4.UHMW-PE installed in front of front panel,it can reduce the friction factor between vessel and fender,and lower the shear strength while vessel berthing and raising the fender using life.
5.It apply for low reaction force,high energy absorption dock and that using it all dock the style of installation variety.Easily be installed.
6.Suitable for all kinds of docks.
Specification Sizes:
Specification |
H |
h |
Φ1 |
Φ2 |
Φ3 |
Φ4 |
n |
d1 |
Md |
JR--AB 500 |
500 |
25 |
425 |
325 |
675 |
750 |
4 |
30 |
M24 |
JR--AB 600 |
600 |
27 |
510 |
390 |
810 |
900 |
6 |
30 |
M24 |
JR--AB 700 |
700 |
32 |
595 |
455 |
945 |
1050 |
6 |
38 |
M30 |
JR--AB 800 |
800 |
36 |
680 |
520 |
1080 |
1200 |
6 |
44 |
M36 |
JR--AB 900 |
900 |
41 |
765 |
585 |
1215 |
1350 |
6 |
44 |
M36 |
JR--AB 1000 |
1000 |
45 |
850 |
650 |
1350 |
1500 |
6 |
56 |
M42 |
JR--AB 1100 |
1100 |
50 |
935 |
715 |
1485 |
1650 |
6 |
50 |
M42 |
JR--AB 1150 |
1150 |
52 |
998 |
750 |
1550 |
1725 |
6 |
56 |
M42 |
JR--AB 1200 |
1200 |
54 |
1020 |
780 |
1620 |
1800 |
8 |
50 |
M42 |
JR--AB 1300 |
1300 |
59 |
1105 |
845 |
1755 |
1950 |
8 |
60 |
M48 |
JR--AB 1400 |
1400 |
66 |
1190 |
930 |
1890 |
2100 |
8 |
60 |
M48 |
JR--AB 1600 |
1600 |
72 |
1360 |
1060 |
2160 |
2400 |
8 |
70 |
M48 |
JR--AB 1800 |
1800 |
78 |
1530 |
1190 |
2430 |
2700 |
10 |
76 |
M52 |
Dynamics Performance :
1. High reaction force; High reaction force; Standard reaction force; Low reaction force
2. Performance tolerance: ±10%
http://www.jerimarine.com/